| Application |
Product |
Typical characteristics |
Principal Application |
Characteristics |
Packing (Net: Kg) |
| Vacuum pump oil |
Diffusion pump oil |
LION DIFFUSION PUMP OIL S |
Ultimate pressure: less than3.8X10-7 Pa, less
than (5X10-9 Torr) |
Diffusion pump |
Small effect of contamination.High
exhausting speed. Very small oil back-flow. Wide hydraulic range
of temperature. Small pressure fluctuation to electricity fluctuation |
1lDecorated canX10 18l Can |
| LION DIFFUSION PUMP OIL A |
Ultimate pressure: less than3.8X10-5 Pa, less
than (5X10-7 Torr) |
| Rotary pump oil |
CLESUPAR S-70DX |
Vapor pressure: (25°C) 4.6X10-6 Pa (6.1X10-8
Torr) (50°C) 1.1X10-4 Pa (1.5X10-6
Torr) |
Rotary pump for specialty gas lon
syringe Chemical etching instrument Vacuum CVD instrument Environmental
disruption analyzer Multi-purpose rotary pump, etc |
Excellent heat-resistance and anti-acid properties due to synthetic
hydrocarbon having aromatic ring. Strong to exhaust gas such as
NOx, O2, O3, halogen compound, etc. Several ten times oil life of
that of mineral oil. Drastically decreased oil exchanging number
comparing with conventional products. |
18l Can |
| CLESUPAR S-70X |
Vapor pressure: (25°C)
3.9X10-5 Pa (5.2X10-7 Torr) (50°C) 0.8X10-3
Pa (1.0X10-5 Torr) |
| CLESUPAR L-1000 |
Vapor pressure: less than (50°C)0.81X10-3
Pa. less than (1.0X10-5 Torr) |
All kinds of rotary pump Small pump |
Low vapor pressure.
High vacuum Good oxidative stability and water separation due to
highly purified mineral oil Great heat-resistance and anti-acid
properties |
18kg Can
200kg Drum |
| CLESUPAR L-700 |
| CLESUPAR L-400 |
| Lubricants |
Liquid Lubricant base oil |
LIPOLUBE Series
(20, 40, 60, 80, 100) |
Kinematic viscosity: (100°C) 1.7-40cSt, (40°C)5.1-70cSt
Pour-point: less than - 40°C
| Engine oil, grease, gear oil, etc. |
Good fluidity at low temperature.
Various kinds of lubricants having wide temperature range for use |
15kg Can
170kg Drum |
| LEOCON 1000 Series |
Kinematic viscosity: (98.9°C) 45-65cSt, Pour-point:
less than -50°C
| Water-soluble hydraulic oil
Water-soluble machining oil
Water-soluble hardening oil, etc. |
Freely selectable of
desired viscosity Very good viscosity-temperature characteristics
Stable non-volatile polymer. Not generate sludge at all |
18kg Can
200kg Drum |
| LEOCON 5000 Series |
Kinematic viscosity: (98.9°C) 85-95cSt, Pour-point:
less than -60°C
|
| PASTELL M Series |
Kinematic viscosity: (100°C) 0.44-1.8.cSt, (40°C)0.84-4.86.cSt |
Raw material for various kinds of processing
oils |
High lubricant properties |
170kg Drum |
| RUBINOL F-200 Series |
Kinematic viscosity: (100°C )3.9-12.6.cSt, (40°C)17.4-66.5.cSt
Pour-point: -57 - -5°C
Viscosity index: 121 - 203
| Engine oil Grease Calendering oil
Machining oil, etc. |
Low pour-point Great
heat-resistance |
180kg Drum |
| RUBINOL F-300 Series |
| RUBINOL F-400 Series |
| KETJENLUBE Series |
Kinematic viscosity: (100°C) 1.7-65cSt, (40°C)137-757cSt
Pour-point: less than - 24°C
| Engine oil Various kinds of processing oils
Great wear-resistance. |
High viscosity index. Low volatile
properties |
25kg Can 180kg Drum |
| Lubricant additive |
ARMEEN Series |
- |
Raw material for anti°Corroding
agent Ultimate pressure increaser Grease viscosity adjuster |
Has high oil solubility
and base number, gives lubricant oil ideal acid-removal properties,
offers anti°Corrosion properties and oil character increasing performance |
14kg Can, others |
| DUOMEEN Series |
- |
14kg Can, others |
| ARMID Series |
Fusing point: 74 - 100°C
| 20kg Corrugated fiberboard,etc. |
| ETHOMEEN Series |
HLB: 5.1 - 14.9 |
16kg Can, others |
| Lubricant emulsifier |
LIPONOX NC Series |
HLB: 3.3 - 18.2 |
Emulsifier for various kinds of emulsifying type machining oils |
Freely selectable desired
HLB. Possible to obtain stable emulsifying corresponding to purpose |
18kg Can
200kg Drum |
| LEOX Series |
HLB: 9.5 - 15.6 |
17kg Can
180kg Drum |
| ETHOMEEN Series |
HLB: 5.1 - 14.9 |
16kg Can 180kg Drum |
| ETHODUOMEEN Series |
- |
| LEOFAT Series |
HLB: 5.1 - 14.9 |
16kg Can |